Internet of Things Based Ventilation System for Brooding Facility of the Asri Wijaya Farmer Group
DOI:
https://doi.org/10.51903/q02ana73Keywords:
IoT, Ammonia, Brooding Facility, Gas Sensor, DOCAbstract
The brooding phase is the most critical period in the poultry life cycle, determining the success of production performance in the subsequent stages. However, environmental management in smallholder farms, such as the Asri Wijaya Livestock Group, still faces significant challenges concerning microclimate fluctuations and the accumulation of toxic gases. This study aims to integrate Internet of Things (IoT) technology into a ventilation system to mitigate mortality risks resulting from high concentrations of ammonia (NH₃) and carbon dioxide (CO₂). Through a Research and Development (R&D) approach, the system was developed using an ESP32 microcontroller integrated with DHT22, MQ-135, and MQ-2 sensors for real-time monitoring of environmental parameters. Data are continuously acquired and processed to drive actuators, including exhaust fans and heating systems using incandescent lamps, via threshold control logic. Experimental results indicate that the system can maintain temperature stability within the optimal range of 33°C and effectively reducing hazardous gas concentrations below critical thresholds (NH₃ < 25 ppm; CO₂ < 3,000 ppm). The scientific contribution of this research lies in the architectural design of an adaptive and economical environmental control system for small-scale livestock farming. The implications of this study extend beyond enhancing operational efficiency and animal welfare to driving digital transformation toward sustainable Precision Livestock Farming at the local level.
References
[1] Cobb-Vantress, Cobb Broiler Management Guide. Siloam Springs, AR: Vantress, Inc., 2021. [Online]. Available: https://www.cobb-vantress.com/assets/Cobb-Files/663d276686/Cobb-Broiler-Management-Guide.pdf
[2] A. A. Justiani, "Hubungan Paparan Gas Amonia terhadap Gangguan Pernapasan pada Pekerja Peternakan Ayam," J. Med. Hutama, vol. 2, no. 2, pp. 750–756, 2021. [Online]. Available: https://jmh.pubmedia.id/index.php/jmh/article/view/256
[3] Fatahillah, Nasri, and Munawar, "Rancang Bangun Prototype Pengendali Gas Amonia pada Peternakan Ayam Broiler Berbasis IoT," J. TEKTRO, vol. 7, no. 2, pp. 234–237, 2023. [Online]. Available: https://jurnal.pnl.ac.id/tektro/article/view/4243
[4] Pendriadi, S. Meliala, M. A. Muthalib, and A. Bintoro, "Studi Kadar Gas Amonia Menggunakan Sensor MQ135 Menggunakan Spreadsheet Berbasis Internet of Thing (IoT)," TRANSMISI, vol. 25, no. 2, pp. 75–84, 2023, doi: 10.14710/transmisi.25.2.75-84.
[5] A. Budiman, R. R. Suryono, and D. Darwis, "Implementasi Sensor Gas Amonia Berbasis Internet of Things pada Peternakan Ayam Potong dengan Sistem Monitoring dan Pengendalian Kualitas Udara Otomatis," MALCOM, vol. 5, no. 1, pp. 343–349, 2025, doi: 10.57152/malcom.v5i1.1023.
[6] A. Febrianto, B. Santoso, and H. Setiawan, "Optimasi Manajemen Suhu dan Kualitas Udara pada Kandang Brooding Menggunakan Sistem Otomasi Berbasis Mikrokontroler," J. Teknol. Pertan. Digit., vol. 5, no. 2, pp. 112–125, 2024. [Online]. Available: https://jurnal.itb.ac.id/jtpd/article/view/2024.5.2.3
[7] R. Aspari, L. D. Samsumar, E. Suryadi, A. Akbar, and Zaenudin, "Sistem Monitoring Suhu dan Kelembapan pada Kandang Ayam Broiler Berbasis Internet of Things untuk Meningkatkan Produksi," J. KOMITEK, vol. 1, no. 4, pp. 351–358, 2024, doi: 10.51903/komitek.v1i4.432.
[8] J. Fitra, D. Rofianto, and K. Amaliah, "Implementasi Sistem Telemetri Monitoring Gas serta Suhu dan Kelembaban pada Kandang Ayam Closed House Berbasis IoT," J. Multimedia dan IT, vol. 8, no. 1, pp. 1–6, 2024, doi: 10.46961/jomit.v8i1.1023.
[9] S. Suhaeb, Y. A. Djawad, H. Jaya, Ridwansyah, Sabran, and A. Risal, Mikrokontroler dan Interface. Makassar: Univ. Negeri Makassar, 2017. [Online]. Available: http://eprints.unm.ac.id/11234
[10] Espressif Systems, "ESP32 Series Datasheet v5.2," Shanghai, China: Espressif Systems, 2025. [Online]. Available: https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf
[11] A. Priyansah, M. Adam, T. Arrahman, and N. Sakdiyah, "Kotak Sampah Pintar Berbasis IoT Menggunakan ESP32 dan Sensor Ultrasonik," JTECE, vol. 7, no. 2, pp. 176–187, 2025, doi: 10.51903/jtece.v7i2.512.
[12] M. Nizam, H. Yuana, and Z. Wulansari, "Mikrokontroler ESP32 Sebagai Alat Monitoring Pintu Berbasis Web," JATI, vol. 6, no. 2, pp. 767–772, 2022, doi: 10.36040/jati.v6i2.5312.
[13] D. Setiawati, R. V. Yuliantari, and B. Fatkhurrozi, "Design and Development of an IoT-Based Temperature and Ammonia Gas Detector Using Fuzzy Logic for Broiler Chicken Coops," J. Appl. Electr. Eng., vol. 9, no. 2, pp. 148–154, 2021, doi: 10.30871/jaee.v5i2.3251.
[14] A. Ramadhan, M. Yusuf, and R. Trisna, "Sistem Pendeteksi Kebocoran Gas Berbasis IoT Sebagai Alat Bantu Keselamatan Rumah Tangga," Zetroem, vol. 3, no. 2, pp. 15–21, 2023, doi: 10.33005/zetroem.v5i2.112.
[15] T. U. Syamsuri, R. N. Amalia, N. Huda, and M. I. Arifin, "Rancang Bangun Alat Monitoring Daya Listrik di Asrama Berbasis Web Menggunakan ESP32," Elposys, vol. 9, no. 3, pp. 139–145, 2023, doi: 10.31593/elposys.v9i3.921.
[16] H. Kusuma and D. Putra, "Penerapan Sistem Otomasi pada Kandang Brooding untuk Mengurangi Human Error," J. Tek. dan Manajemen Ind., vol. 17, no. 1, pp. 45–53, 2022, doi: 10.22441/jtmi.v17i1.14512.
[17] R. Hidayat and Y. Saragih, "Evaluasi Penggunaan Aplikasi Blynk dalam Monitoring Sistem Pertanian dan Peternakan Cerdas," JSON, vol. 3, no. 4, pp. 512–520, 2022, doi: 10.30865/json.v3i4.4123.
[18] Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta, 2019. [Online]. Available: https://cvalfabeta.com/product/metode-penelitian-kuantitatif-kualitatif-dan-rd
[19] D. M. Anwar, I. Emita, M. Melyani, I. R. Rahadjeng, W. Indrarti, A. Rafik, and D. I. Sari, "Optimizing Regional Financial Management through the Transformation of the Digital Financial Information System in the Bekasi City Government," J. Technol. Inform. Eng., vol. 5, no. 1, pp. 200–218, 2026, doi: 10.51903/jtie.v5i1.495.
[20] A. Zainudin and E. Siswanto, "Leveraging Machine Learning for Personalized Recommendations in Mobile Tourism: A Study on Collaborative and Content-Based Filtering," J. Technol. Inform. Eng., vol. 3, no. 2, pp. 235–248, 2024, doi: 10.51903/jtie.v3i2.190.
[21] S. Setiani and B. Sudirman, "Security Design in Doors and Windows Arduino Based Using Fingerprint and SMS Gateway (Case Study at Pesona Asri Tembalang Housing)," J. Technol. Inform. Eng., vol. 2, no. 2, pp. 48–88, 2023, doi: 10.51903/jtie.v2i2.170.
[22] G. Pebadja and S. Kholifah, "The Impact of Brand Image, Pricing Strategies, and Product Quality on Consumer Loyalty in the Coffee Industry: An Empirical Study Using Structural Equation Modeling," J. Manage. Inform., vol. 2, no. 2, pp. 1–20, 2023, doi: 10.51903/jmi.v2i2.134.
[23] S. Handoko and N. Qosidah, "Supporting Strategic Intuition for Product Feature Innovation in Early-Stage Fintech Payments Start-ups," J. Manage. Inform., vol. 4, no. 3, pp. 1043–1058, 2025, doi: 10.51903/jmi.v4i3.234.
[24] M. Melyani, R. Swastika, R. Widyastuti, R. K. Shaura, E. Y. Pramularso, D. T. Anggarini, and D. Tambunan, "The Effect of Quality Product, Price Perception, and Promotion on Vivo Smartphone Purchase Decisions: A Study at the Archa Phone Counter in Bekasi," J. Manage. Inform., vol. 4, no. 3, pp. 915–932, 2025, doi: 10.51903/jmi.v4i3.203.
[25] J. P. A. Kris and J. Lahallo, "Design of Customer Queue Management System in Barbershop," J. Ilm. Sist. Inf., vol. 4, no. 3, pp. 321–339, 2025, doi: 10.51903/m6be0y92.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Wakim Wakim, Sulartopo Sulartopo, Iman Saufik Suasana

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All articles published in this journal are open access and licensed under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0).
Under this license:
-
Authors retain copyright of their work.
-
Others are free to:
-
Share — copy and redistribute the material in any medium or format;
-
Adapt — remix, transform, and build upon the material for any purpose, even commercially;
-
-
As long as they:
-
Give appropriate credit to the original author(s) and the source;
-
Provide a link to the license;
-
Indicate if changes were made;
-
Distribute their contributions under the same license as the original.
-
This ensures that derivative works will also remain free and open under the same terms.













.png)