Implementation of Testing of Automatic Light Control Tools Using Arduino Uno-Based Sound Sensors
DOI:
https://doi.org/10.51903/w8gh5k23Keywords:
Automatic Light, Sound Sensor, Arduino Uno, Energy Efficiency, Home AutomationAbstract
This study aims to design and test an automatic lighting control system using a sound sensor based on the Arduino Uno to address electrical energy wastage caused by lights remaining on when unoccupied. This study aims to design and test an automatic light control system using a voice sensor based on the Arduino Uno to reduce electricity wastage caused by lights left on without activity. The research focuses on designing and testing a voice sensor-based automatic light control system using Arduino Uno as a solution to electricity wastage when lights are left on without activity. The study is applied in a household environment and developed utilizing a voice sensor to improve the success rate of voice command detection. The research method involved gathering requirements for hardware design (using a sound sensor, relay, Arduino Uno, and supporting components), software, and Arduino IDE design, testing using response time and error rate based on distances ranging from 50cm to 450cm. The results showed that the system achieved a success rate of 87.5% with a response time of 1.2 seconds. This system is considered effective in detecting loud sounds to automatically turn lights on and off, thereby supporting the concept of a smart home while improving electrical energy efficiency.
References
[1] E. Siswanto, S. Wahyuning, N. Qosidah, H. I. Huda, and P. Asti, “Enhancing Employee Engagement through Gamified Digital Platforms: A Case Study Approach in the Technology Sector,” J. Manag. Informatics, vol. 3, no. 3, pp. 531–548, Dec. 2024, doi: 10.51903/jmi.v3i3.59.
[2] S. Gupta, D. Kumar, and S. Sharma, “Affective Gesture Recognition in Virtual Reality Using LSTM-CNN Fusion for Emotion-Adaptive Interaction,” J. Technol. Informatics Eng., vol. 4, no. 1, pp. 21–40, Apr. 2025, doi: 10.51903/jtie.v4i1.278.
[3] C. F. Laksono, R. S. Maulana, E. D. Wahyuni, and A. Wulansari, “Eksplorasi Kepuasan Pengguna PayPal Digital Wallet di Indonesia: Pendekatan UTAUT 2,” J. Ilm. Sist. Inf., vol. 4, no. 3, pp. 288–301, Jul. 2025, doi: 10.51903/c962xq65.
[4] N. Gentile, “Improving Lighting Energy Efficiency Through User Response,” Energy Build., vol. 263, p. 112022, 2022, doi: 10.1016/j.enbuild.2022.112022.
[5] M. Alowaidi, “Fuzzy Efficient Energy Algorithm in Smart Home Environment Using Internet of Things for Renewable Energy Resources,” Energy Reports, vol. 8, pp. 2462–2471, Nov. 2022, doi: 10.1016/j.egyr.2022.01.177.
[6] N. T. Tsebesebe, K. Mpofu, S. Sivarasu, and P. Mthunzi-Kufa, “Arduino-Based Devices in Healthcare and Environmental Monitoring,” Discov. Internet Things, vol. 5, no. 1, p. 46, Apr. 2025, doi: 10.1007/s43926-025-00139-z.
[7] M. A. Khan et al., “Smart Android Based Home Automation System Using Internet of Things (IoT),” Sustainability, vol. 14, no. 17, p. 10717, Aug. 2022, doi: 10.3390/su141710717.
[8] F. Chekired, O. Taabli, Z. M. Khellili, A. Tilmatine, A. T. De Almeida, and L. Canale, “Near-Zero-Energy Building Management Based on Arduino Microcontroller—On-Site Lighting Management Application,” Energies, vol. 15, no. 23, p. 9064, Nov. 2022, doi: 10.3390/en15239064.
[9] M. H. Elkholy, T. Senjyu, M. E. Lotfy, A. Elgarhy, N. S. Ali, and T. S. Gaafar, “Design and Implementation of a Real-Time Smart Home Management System Considering Energy Saving,” Sustainability, vol. 14, no. 21, p. 13840, Oct. 2022, doi: 10.3390/su142113840.
[10] P. Krishnan, A. V. Prabu, S. Loganathan, S. Routray, U. Ghosh, and M. AL-Numay, “Analyzing and Managing Various Energy-Related Environmental Factors for Providing Personalized IoT Services for Smart Buildings in Smart Environment,” Sustainability, vol. 15, no. 8, p. 6548, Apr. 2023, doi: 10.3390/su15086548.
[11] G. A. Alvarez-Garcia, C. L. Zúñiga-Cañón, A. J. Garcia-Sanchez, J. Garcia-Haro, and R. Asorey-Cacheda, “Optimizing Ambiance: Intelligent RGB Lighting Control in Structures Using Fuzzy Logic,” Appl. Sci., vol. 14, no. 10, p. 4156, May 2024, doi: 10.3390/app14104156.
[12] W. Villegas-Ch and J. Govea, “Application of Deep Learning in the Early Detection of Emergency Situations and Security Monitoring in Public Spaces,” Appl. Syst. Innov., vol. 6, no. 5, p. 90, 2023, doi: 10.3390/asi6050090.
[13] N. V Nalakurthi et al., “Challenges and Opportunities in Calibrating Low-Cost Environmental Sensors,” Sensors, vol. 24, no. 11, p. 3650, 2024, doi: 10.3390/s24113650.
[14] S. Komarizadehasl, B. Mobaraki, H. Ma, J. A. Lozano-Galant, and J. Turmo, “Low-Cost Sensors Accuracy Study and Enhancement Strategy,” Appl. Sci., vol. 12, no. 6, p. 3186, Mar. 2022, doi: 10.3390/app12063186.
[15] S. Rani et al., “Arduino Based Multisensor Smart Monitoring Device for Electrical Appliances,” Macromol. Symp., vol. 407, no. 1, p. 2100363, Feb. 2023, doi: 10.1002/masy.202100363.
[16] A. M. Agwa and A. A. El-Fergany, “Protective Relaying Coordination in Power Systems Comprising Renewable Sources: Challenges and Future Insights,” Sustainability, vol. 15, no. 9, p. 7279, Apr. 2023, doi: 10.3390/su15097279.
[17] G. Takács, E. Mikuláš, M. Gulan, A. Vargová, and J. Boldocký, “AutomationShield: An Open-Source Hardware and Software Initiative for Control Engineering Education,” IFAC-PapersOnLine, vol. 56, no. 2, pp. 9594–9599, Jan. 2023, doi: 10.1016/j.ifacol.2023.10.263.
[18] J. Stanley, J. A. Hunt, P. Kunovski, and Y. Wei, “A Review of Connectors and Joining Technologies for Electronic Textiles,” Eng. Reports, vol. 4, no. 6, p. e12491, Jun. 2022, doi: 10.1002/eng2.12491.
[19] P. M. P. Curralo, R. D. S. G. Campilho, J. A. P. Pereira, and F. J. G. Silva, “Design of Connector Assembly Equipment for the Automotive Industry,” Machines, vol. 12, no. 10, p. 731, Oct. 2024, doi: 10.3390/machines12100731.
[20] J. A. Ramos-Hernanz, D. Teso-Fz-Betoño, I. Aramendia, M. Erauzquin, E. Kurt, and J. M. Lopez-Guede, “Smart Low-Cost On-Board Charger for Electric Vehicles Using Arduino-Based Control,” Energies, vol. 18, no. 8, p. 1910, Apr. 2025, doi: 10.3390/en18081910.
[21] A. F. S. Pino, P. H. Ruiz, and J. A. H. Alegria, “A Software Products Line as Educational Tool to Learn Industrial Robots Programming with Arduino,” Electronics, vol. 11, no. 5, p. 769, Mar. 2022, doi: 10.3390/electronics11050769.
[22] I. K. Hwang, T. W. Kong, and J. H. Park, “Graphical Arduino IDE System with Wiring Layout and Flowchart Functions for Physical Computing Education,” Comput. Appl. Eng. Educ., vol. 32, no. 6, p. e22783, Nov. 2024, doi: 10.1002/cae.22783.
[23] A. Mateen, M. Z. Hanif, N. Khatri, S. Lee, and S. Y. Nam, “Smart Roads for Autonomous Accident Detection and Warnings,” Sensors, vol. 22, no. 6, p. 2077, Mar. 2022, doi: 10.3390/s22062077.
[24] Y. Iliev and G. Ilieva, “A Framework for Smart Home System with Voice Control Using NLP Methods,” Electronics, vol. 12, no. 1, p. 116, Dec. 2022, doi: 10.3390/electronics12010116.
[25] A. Y. Al-Rawashdeh et al., “Experimental Investigation of Microcontroller-Based Acoustic Temperature Transducer Systems,” Sensors, vol. 23, no. 2, p. 884, Jan. 2023, doi: 10.3390/s23020884.
[26] S. Tselegkaridis and T. Sapounidis, “Exploring Students’ Hands-On Performance, Attitudes, and Usability with Arduino Modular Boards,” Information, vol. 15, no. 2, p. 88, Feb. 2024, doi: 10.3390/info15020088.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Dian Mutia, Jimmie Jimmie, Kemas Muhammad Wahyu Hidayat

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
All articles published in this journal are open access and licensed under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0).
Under this license:
-
Authors retain copyright of their work.
-
Others are free to:
-
Share — copy and redistribute the material in any medium or format;
-
Adapt — remix, transform, and build upon the material for any purpose, even commercially;
-
-
As long as they:
-
Give appropriate credit to the original author(s) and the source;
-
Provide a link to the license;
-
Indicate if changes were made;
-
Distribute their contributions under the same license as the original.
-
This ensures that derivative works will also remain free and open under the same terms.













.png)